Factory Outlets Drain Check Valves - API 5CT N-80 Grade – Triround

Short Description:

Product Detail

Product Tags

Feedback (2)

We believe that prolonged time period partnership is really a result of top of the range, benefit added provider, prosperous knowledge and personal contact for Steel Forged Welding Neck Flange , Stainless Steel Handrail Fittings , Weld Neck Flat Face Flange , For even more data, please do not be reluctant to call us. All inquiries from you may be highly appreciated.

Factory Outlets Drain Check Valves - API 5CT N-80 Grade – Triround Detail:

API-5CT N80 oilfield casing pipe contains N80-1 and N80-Q types. Those two materials are absolutely consistent regarding the chemical composition and mechanical attributes, they are just various in the heat treatment.

During heat treatment, N80-1 steel is treated by normalizing and tempering, while N80Q steel is treated by quenching and tempering. Therefore, the collapsing strength and internal pressure strength of N80Q are higher than that of N80-1. N80-1 or N80Q should be clearly shown by the designer when N80 casing is selected.

As its mechanical properties are higher than J55 and K55 types, it may very well be utilized to certain a little more challenging formations. With deeper downhole depth than J55 and K55 types, it can be applied for the exploitation of middle-level oil and gas.

Due to the high capability of N80 material, those API-5CT casing pipes are broadly applied in natural gas as well as coal bed methane extraction, and geothermal wells.

Specifications

Inspection

Physical properties are checked and each length hydrostatically tested, normally to only 3,000 psi in the plain end (unthreaded) condition. The following are also checked:

Dimensions
Weights
Straightness
Lengths

Part of this inspection is to drift all lengths.
Despite all the American Petroleum Institute (API) specifications and testing, some tubing defects are still found after delivery; thus, some operators do further inspection.

Inspection Method

Size and surface inspection
NDT and pressure test and third party certication
Hydrostatic
Drifting test
Physical and chemicail analysis
Hardness and pressure test.
Electromagnetic
Magnetic particle
Ultrasonic

Dimensions And Weight

Size	Weight	Outside Diameter		Wall Thickness		End Finish
		Outside Diameter		Wall Thickness		Grade
		in	mm	in	mm	J55K55	L80	N80	C90T95	P110
4 1/2	9.50	4.500	114.3	0.205	5.21	PS	–	–	–	–
	10.50			0.224	5.69	PSB	–	–	–	–
	11.60			0.250	6.35	PSLB	PLB	PLB	PLB	PLB
	13.50			0.290	7.37	–	PLB	PLB	PLB	PLB
	15.10			0.337	9.56	–	–	–	–	PLB
5	11.50	5.00	127.00	0.220	5.59	PS	–	–	–	–
	13.00			0.253	6.43	PSLB	–	–	–	–
	15.00			0.296	7.52	PSLB	PLB	PLB	PLBE	PLB
	18.00			0.362	9.19	–	PLB	PLB	PLBE	PLB
	21.40			0.437	11.10	–	PLB	PLB	PLB	PLB
	23.20			0.478	12.14	–			PLB
	24.10			0.500	12.70	–			PLB
5 1/2	14.00	5.500	139.7	0.244	6.20	PS	–	–	–	–
	15.50			0.275	6.98	PSLB	–	–	–	–
	17.00			0.304	7.72	PSLB	PLB	PLB	PLBE	PLB
	20.00			0.361	9.17	–	PLB	PLB	PLBE	PLB
	23.00			0.415	10.54	–	PLB	PLB	PLBE	PLB
6 5/8	20.00	6.625	168.28	0.288	7.32	PSLB	–	–	–	–
	24.00			0.352	8.94	PSLB	PLB	PLB	PLBE	PLB
	28.00			0.417	10.59	–	PLB	PLB	PLBE	PLB
	32.00			0.475	12.06	–	PLB	PLB	PLBE	PLB
7	17.00	7.00	177.80	0.231	5.87	–	–	–	–	–
	20.00			0.272	6.91	PS	–	–	–	–
	23.00			0.317	8.05	PSLB	PLB	PLB	PLBE	–
	26.00			0.362	9.19	PSLB	PLB	PLB	PLBE	PLB
	29.00			0.408	10.36	–	PLB	PLB	PLBE	PLB
	32.00			0.453	11.51	–	PLB	PLB	PLBE	PLB
	35.00			0.498	12.65	–	PLB	PLB	PLBE	PLB
	38.00			0.540	13.72	–	PLB	PLB	PLBE	PLB
7 5/8	24.00	7.625	193.68	0.300	7.62	–	–	–	–	–
	26.40			0.328	8.33	PSLB	PLB	PLB	PLBE	PLB
	29.70			0.375	9.52	–	PLB	PLB	PLBE	PLB
	33.70			0.430	10.92	–	PLB	PLB	PLBE	PLB
	39.00			0.500	12.70	–	PLB	PLB	PLBE	PLB
	42.80			0.562	14.27	–	PLB	PLB	PLB	PLB
	45.30			0.595	15.11	–	PLB	PLB	PLB	PLB
	47.10			0.625	15.88	–	PLB	PLB	PLB	PLB
8 5/8	24.00	8.625	219.08	0.264	6.71	PS	–	–	–	–
	28.00			0.304	7.72	–	–	–	–	–
	32.00			0.352	8.94	PSLB	–	–	–	–
	36.00			0.400	10.16	PSLB	PLB	PLB	PLBE	PLB
	40.00			0.450	11.43	–	PLB	PLB	PLBE	PLB
	44.00			0.500	12.70	–	PLB	PLB	PLBE	PLB
	49.00			0.557	14.15	–	PLB	PLB	PLBE	PLB
9 5/8	32.30	9.625	244.48	0.312	7.92	–	–	–	–	–
	36.00			0.352	8.94	PSLB	–	–	–	–
	40.00			0.395	10.03	PSLB	PLB	PLB	PLBE	–
	43.50			0.435	11.05	–	PLB	PLB	PLBE	PLB
	47.00			0.472	11.99	–	PLB	PLB	PLBE	PLB
	53.50			0.545	13.84	–	PLB	PLB	PLBE	PLB
	58.40			0.595	15.11	–	PLB	PLB	PLB	PLB
10 3/4	32.75	10.75	273.05	0.279	7.09	–	–	–	–	–
	40.50			0.350	8.89	PSB	–	–	–	–
	15.50			0.400	10.16	PSB	–	–	–	–
	51.00			0.450	11.43	PSB	PSB	PSB	PSBE	PSB
	55.50			0.495	12.57	–	PSB	PSB	PSBE	PSB
	60.70			0.545	13.84	–	–	–	PSBE	PSB
	65.70			0.595	15.11	–	–	–	PSB	PSB
13 3/8	48.00	13.375	339.73	0.330	8.38	–	–	–	–	–
	54.50			0.380	9.65	PSB	–	–	–	–
	61.00			0.430	10.92	PSB	–	–	–	–
	68.00			0.480	12.19	PSB	PSB	PSB	PSB	PSB
	72.00			0.514	13.06	–	PSB	PSB	PSB	PSB
16	65.00	16	406.40	0.375	9.53	–	–	–	–	–
	75.00			0.438	11.13	PSB	–	–	–	–
	84.00			0.495	12.57	PSB	–	–	–	–
	109.00			0.656	16.66	P	P	P	–	P
18 5/8	87.50	18.625	473.08	0.435	11.05	PSB	–	–	–	–
20	94.00	20	508.00	0.438	11.13	PSLB	–	–	–	–
	106.50			0.500	12.70	PSLB	–	–	–	–
	133.00			0.635	16.13	PSLB	–	–	–	–

Product detail pictures:

We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Factory Outlets Drain Check Valves - API 5CT N-80 Grade – Triround, The product will supply to all over the world, such as: Seychelles , Buenos Aires , Moldova , We would very much welcome an opportunity to do business with you and have pleasure in attaching further details of our products. Excellent quality, competitive prices,punctual delivery and dependable service can be guaranteed.

6 Inch Pipe Flange